Has anyone else had this experience, It seams that 4WD robots survive the above setup.
Mon Dec 20, 2004 3:54 pm
Eyce
Joined: 17 Jun 2004
Posts: 111
Location: Geelong, Victoria
The result can also be Grilled Sausages, burnt cheese, or Tomato Soup.
_________________
Mon Dec 20, 2004 4:35 pm
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
Tomato soup
Lmfao x a trilion _________________ Tim Team Reaper.
Mon Dec 20, 2004 5:31 pm
colin
Joined: 16 Jun 2004
Posts: 102
I didn't think anyone was running there drill motors at 24V. I think The Acid Test (lightweight) does, from memory they get hot real quick(and that's just driving around, not stalling them)
Try this formula:
2 * XU1 + 13.6 Kg + 12V SLA = the smoke staying in
Mon Dec 20, 2004 5:45 pm
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
2 * xu1 + cobra + two 12v slas in parralel = fails the ten second test but works at least for a little while
_________________ Tim Team Reaper.
Mon Dec 20, 2004 5:50 pm
NMO Experienced Roboteer
Joined: 16 Jun 2004
Posts: 486
Location: Melbourne
I beleive KO runs 12V drills at 24Volt (pls corect if I'm wrong tim) but he uses 4 of them
Mon Dec 20, 2004 6:03 pm
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
Yer i think he dose two alltho the speed he was running at gives the impression that its only 12? _________________ Tim Team Reaper.
Mon Dec 20, 2004 6:07 pm
kkeerroo Experienced Roboteer
Joined: 17 Jun 2004
Posts: 1459
Location: Brisbane
Hellbringer has 2 x 9.6V drills and 2 x 12V drills running at 24V with 150mm and was running fine for the first 3 sessions, including shooting 3 feet into the air in the melee on the first day. But we seem to have lost the brushes in 3 of the motors and melted the plastic face plate on the forth when it fought SS Rat. It seemed to be instantanious (whoa, spelling) too. _________________ Get Some!!!
Secretary of the Queensland Robotics Sports Club inc.
Mon Dec 20, 2004 6:11 pm
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
shouldent this be in the drill motor section rather then clogging up the forum _________________ Tim Team Reaper.
Mon Dec 20, 2004 6:25 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
quote:
2 * xu1 + cobra + two 12v slas in parralel = fails the ten second test but works at least for a little while
That formula is wrong Tim It was actually 2 * 9.6v kk2's + cobra + 14.4v NiMH = 1min of rumble before smoke. _________________ https://www.halfdonethings.com/
Mon Dec 20, 2004 9:34 pm
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
Like i said "fails ten secong test but works at least for a little while lol" _________________ Tim Team Reaper.
Tue Dec 21, 2004 11:30 am
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
[quote="teamvertex"]
quote:
"When the spinners fight, there will be sparks tonight. The crowd will roar, when parts are scattered across the floor."
So wed better close the door _________________ Tim Team Reaper.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum