If those welds shear off, I'll buy you a 12 pack of coke... or a free punch to teh fayce _________________ https://www.halfdonethings.com/
Sat Mar 25, 2006 8:10 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
because im such a generous guy ill give that offer to jeff XD did you fully weld them or something? my computer is too lame to load all the pics so ive only seen the tacked on ones XD _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
Go you halves in the case of Coke, Glen but not the punch. I figure that hitting the ends of the pipe will have a large leverage effect on the welding and something will bend, even if it doesn't break. I still plan to go for the wheels of course, or the back. Perhaps the other thing that would work witht those huge wheels is to drive Jolt backwards and wait until Arron charges the big rear wedge; those wheels could probably drive right up the wedge and into the blade _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sat Mar 25, 2006 8:57 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
Jolt has got to be able to drive first Can you drive that spinning thing in a straight line, or are you still practising on attacking the walls _________________ https://www.halfdonethings.com/
Sat Mar 25, 2006 9:19 pm
andrew
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
Aaron quiet up bitch, until u actually get something made dont u start the trashtalking.
Borrowing Andrews fine work u lil bot bitch _________________ Andrew Welch, Team Unconventional Robotics
Sat Mar 25, 2006 9:25 pm
Nick Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
I knew I would get the trash talking off to a good start ! Are T2M's 3mm sidewalls quivering with fear yet? _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sat Mar 25, 2006 9:28 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
@Welcher: You forget how long ago T2M was built. Andrew and I bothed worked on it, and I thank Andrew dearly for the help and lessons he taught me when we worked on it. Sure, I haven't built my bots all by myself, but I don't claim to either. Now go smoke some EV's Welcher.
@Nick: T2M has no fear of Jolt. I don't see a need to fear it. 3mm aluminium armour isn't much, but it's enough to survive and beat Jolt. See you in the arena Nick, I'm waiting. _________________ https://www.halfdonethings.com/
Sat Mar 25, 2006 9:36 pm
assassin
Joined: 27 Jun 2004
Posts: 1105
Location: SunshineCoast
The current version of T2M is a purpose built Jolt killing machine, watch out
lol
Last edited by assassin on Sat Mar 25, 2006 10:28 pm; edited 1 time in total
Sat Mar 25, 2006 9:55 pm
Nick Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
If Jolt was a golf club, T2M would be the cane toad Oops, was that going a bit far? _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sat Mar 25, 2006 10:01 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
Lol. The front end was made for horizontal spinners, with the ultimate end use of beating Jolt. But T2M was actually build 3 years ago as a test bed for the big ass winch motors.
EDIT:
If Jolt was a golf club, it would be one of those, over priced clubs that works as good as a $5 club.... Opps... Did I go too far _________________ https://www.halfdonethings.com/
lol and make sure you get a dustpan and broom so you can hand t2m back to aaron well all the parts that are even remotly reconisable as t2m and not dustparticals _________________ as a shadow is seen and not heard i am here
-Waddy the phoenix
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum