RoboWars Australia Wiki : MountingWheels

RobowarsWikka1 :: Categories :: PageIndex :: RecentChanges :: RecentlyCommented :: Login/Register
Most recent edit on 2011-05-23 23:52:22 by GlenRose

Deletions:
-Featherweight Wheel Mounting.



Edited on 2011-05-23 23:51:04 by GlenRose

Additions:
process with pictures goes here
-Featherweight Wheel Mounting.


Deletions:
process with pictures?
- Foam Wheels




Edited on 2011-05-23 23:49:34 by GlenRose

Additions:
In Robowars the smallest thing that was overlooked can bring your robot to a grinding halt in the competition, leaving your creation in a strewn mess of parts over the arena floor. Attaching your wheels is one of those small things and something many roboteers have struggled with for many events to get right. To make hubs generally requires machinery such as a lathe or milling machine. If you dont have one members of the robowars forum should be happy to make some for a low price. You can often find pre made solutions at robotic online stores as well. But anyway this guide will focus on the basics as well as the in depth machining aspects of this subject, so without further ado here's some tips to get you rolling!
Antweight Wheel Mounting
Beetleweight Wheel Mounting
- Colson Wheels
Available at The Robot Marketplace, these wheels are generally used in the largest classes, however they are also made in a usable size for a beetle, the 1 5/8 inch diameter ones to be precise.
Despite being made from solid rubber they are quite lightweight, especially when drilled out and offer fantastic traction. On the other hand being made from solid material they transfer more shock back into the drive train then the foam type, which can be a problem especially in spinners that can fly into the air and land hard on there wheels after a large hit.
To mount the colson wheels is quite simple. Colsons are generally manufactured with good tolerances so and the plastic is quite soft, so making a press fit hub is the fastest and simplest way of going about it.
process with pictures?
- Foam Wheels
Featherweight Wheel Mounting


Deletions:
In Robowars the smallest thing that was overlooked can bring your robot to a grinding halt in the competition, leaving your creation in a strewn mess of parts over the arena floor. Attaching your wheels is one of those small things and something many roboteers have struggled with for many events to get right. So here's some tips to get you rolling!
~&
Antweight Wheel Mounting
 

~&
Beetleweight Wheel Mounting
- Colson Wheels
 

~&
Featherweight Wheel Mounting
 




Edited on 2011-05-23 23:32:03 by GlenRose

Additions:
 

 

 


Deletions:






Edited on 2011-05-23 23:29:31 by GlenRose

Additions:
~&
Antweight Wheel Mounting

~&
Beetleweight Wheel Mounting
- Colson Wheels

~&
Featherweight Wheel Mounting


Deletions:
~&
Antweight Wheel Mounting
There are many wheel solutions for beetleweights, the main ones in use are the soft foam type wheels and the hard colson kind so those are what will be covered.

In Robowars the smallest thing that was overlooked can bring your robot to a grinding halt in the competition, leaving your creation in a strewn mess of parts over the arena floor. Attaching your wheels is one of those small things and something many roboteers have struggled with for many events to get right. So here's some tips to get you rolling!

Valid XHTML 1.0 Transitional :: Valid CSS :: Powered by Wikka Wakka Wiki 1.1.6.1
Page was generated in 0.0392 seconds