Deletions:
basraccm
Edited on 2007-11-12 18:01:55 by BodroNtrba
Additions:
basraccm
Edited on 2006-02-02 22:37:13 by KnightrousOxide
Additions:
Edited on 2006-02-02 17:51:59 by GlenRose
Additions:
Armour/Frame -6mm steel sides, rear, and angled front / rear panels.
-3mm steel lid, wedge and base plate
-4mm steel foward angled panels on the wedge and interior battery bay
-4mm steel triangulation
- totally mild steel build and full TIG welded.
- wedge mounts sideways into the front angled panels via 6x m6 bolts tapped in
Combat Record: 5 wins, 1 loss-4mm steel foward angled panels on the wedge and interior battery bay
-4mm steel triangulation
- totally mild steel build and full TIG welded.
- wedge mounts sideways into the front angled panels via 6x m6 bolts tapped in
Last Event: Robowars 3: Judgement Day
Achievements: 2nd in its first competition, bending the walls at robowars.
Oldest known version of this page was edited on 2006-02-02 17:30:44 by GlenRose []
Page view:
KING COBRA
Builder: Glen Rose
Class: Featherweight
Type: Wedge
Drive: 2x 18v Dewalt drill motors, 1/2" tool steel shafts, 1/4" keyway twin 1/2" bearings and 75mm x 50mm colson performa wheels
Weapon: 16mph ramming, wedging and just straight out torque, easily out pushes conventional 4wd bots
ESC: 2x Victor 855 controllers
Power: 2 x 12v CP2400SCR (2.4ah) Nicad battery packs wired in series. no spacer rings, and soldered with an 80w iron and interconnects made from copper braid.