|
|
|
|
|
|
|
|
|
MoonSet416
Joined: 25 Sep 2016
Posts: 436
Location: Sydney
|
Update:
Two days ago I decided to put the picture of Abomination on facebook, and received some feedback. I then added the following features.
1.Interchangeable weapons
Aside from the original disc, I added a Big Ripto style weapon to combat other spinners. This weapon supposedly has almost the same weight as the disc so I can change weapons freely. However, this weapon has about 25% less MOI compared to the disc.
And here's the original disc.
2.Interchangeable wedges
Taking advice from facebook, I decided to include an option for a uniform wedge to fight horizontal spinners and verticals without wedges. However doing that requires changes to the geometries of the chassis, which resulted in problems with the pseudo-tri-wedge setup. To have a uniform wedge all bulkheads must on the same plane so that the wedge will properly install. In the tri-wedge config, to leave clearance for the hinged wedges to move they have a bit of empty space between bulkheads, resulting in the hinged wedges sticking out in front of the fixed one. I don't want that because the fixed wedge has the most weight on it and therefore has the best ground clearance. To put the fixed wedge in front I added a replaceable fork/wedgelet on top of it to make it stick out.
And here's the fixed wedge. basically the same style of wedge as the one on Contraption.
Also, I plan to add some HDPE armor to it, but that's currently WIP.
And as always, please feel free to comment.
|
Tue Nov 07, 2017 4:41 pm |
|
|
|
|
|
|
|
|