Most recent edit on 2011-05-25 16:10:59 by MartO

Additions:
Download Here∞

---

Edited on 2011-05-25 16:09:46 by MartO

Additions:

Alternative Software

A much more intuitive software version is available but if you want the full version it will cost you $1
http://www.sgr.info/usbradio/default.htm∞

---

Edited on 2011-05-25 16:05:24 by MartO

No differences.

---

Edited on 2011-05-25 16:04:35 by MartO

Additions:
∞
∞
∞
∞
∞

---

Oldest known version of this page was edited on 2011-05-25 16:02:12 by MartO []

Programming the Hobbyking Radio

Parts

• Hobbyking Radio - http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8338∞
• Programming Cable - http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9043∞

Software

• Go to Product Page∞ and go to Files tab under the product description.
• Download the Software and Settings file.
• Extract the driver files and install the T6config.
• Plug in cable and browse to where you extracted the drivers and install

Programming

• Open T6A config
• Select correct com port
• Plug in cable to radio & turn on. You should be able to move bars with sticks

• The following screens show the programming settings for a radio with mixing and trigger switch