|
|
|
|
|
|
|
|
|
|
|
|
|
|
ffej
Experienced Roboteer
Joined: 22 Jun 2004
Posts: 595
Location: Kurrajong, NSW
|
The awards for worst driven and loudest bot would have to go to Singularity
BTW, would anyone know anything that would cause a patch of corrosion into ali about half a mm deep and about the diameter of a 50c coin, other than battery acid? Because during the first inspection of my bot since the event that I did this arvo, I found a patch like the above right near the battery area of singularity. I initially freaked out and went about cutting the shrink rap and padding off the battlepacks to find the leaky cell, but after doing so there appears to be no problem with the pack, no cut cells, and none that look like they have gassed. All of the cells check out with the same voltage, so im guessing they're ok, but I need to be sure.
I cant think of anything I have here that would do it, so I figure it most likely happened at the event. Was anyone using solder fluid or something else corrosive that day that may have splashed in the general direction of singularity?
I dont really care what caused the corrosion, as long as I verify it wasnt the battlepacks dieing on me . . . Any Ideas ? _________________ Jeff Ferrara
fb@ffej.net
ffej.net
|
Wed Sep 15, 2004 9:16 pm |
|
|
|