dyrodium
Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
|
Robot Serial Killers - The competitors and Location Info
Note - this is not a discussion thread, please use the other thread.
Where: Serial Space, Sydney.
33 Wellington St
Chippendale New South Wales 2008, Australia
When: If competing - Arrive by 9AM (i'll be there at for rego, safety and weigh in.
If coming to watch, there'll be rounds from 10AM till 5.
Competitor Info:
Team Name: Team Dyrodium
Member(s): Angus Deveson
Location: Bronte
Background: Studying Industrial Design at UTS, own metalworkshop in Bronte. Organiser of Robot Serial Killers
Bots:
Nyant – Antweight. Vertical spinner with gaffa tape armour.
Squirrel Demoralizer– Beetleweight. Undercutter.
[no image]
Team Name: Unconventional Robotics
Member(s): Andrew Welch
Location: Castle Hill
Background: Been doing this for around 6 years plus
Work at GTK rehab building wheelchairs
Bots:
Ashtray – Antweight. Full body spinner made from an ashtray
Slice – Antweight. Vertical Spinner with Sawblade disk. Carbon fibre, lexan and gaffa tape.
[no image]
Fire Bug – Antweight. Flamethrower.
[no image]
Team Name: ISR
Member(s): Aaron Knight and Cait Geysing
Location: A duo from the rural city of Kingaroy, in Southern QLD.
Background: Employed as a Network Administrator and Receptionist for one of the biggest Rural Merchandise stores in southern QLD.
Bots:
Scarlet – Antweight.
Chassis/Armour: 1mm Carbon Fiber, 1.6mm PCB, 3mm HDPE
Weapon: 22g Hardox spinner bar @ 15000rpm
Drive: 50:1 BotBitz Gearmotors @ 11.1v
Controller: TZ12A BESC for weapon, Pololu B328 drive, AR6110B RX
Batteries: 11.1v 240mAh Lithium Polymer Battery
Notes: Invertible, self-exploding.
Kruger - Antweight
Chassis/Armour: 2.5mm Carbon Fiber, 1mm coke bottle
Weapon: 22g Hardox spinner bar @ 15000rpm
Drive: 50:1 BotBitz Gearmotors @ 11.1v
Controller: Plush10 BESC for weapon, ESCheap10 for drive, BR6000 RX
Batteries: 11.1v 240mAh Lithium Polymer Battery
Notes: Can self right , self-exploding.
Little Ego - Antweight
Chassis/Armour: 1mm Carbon Fiber, 3mm HDPE
Weapon: Stainless steel wedge
Drive: 50:1 BotBitz Gearmotors @ 11.1v
Controller: ESCheap10 for drive
Batteries: 11.1v 240mAh Lithium Polymer Battery
Notes: Invertible
Twitch - Antweight (maybe)
Chassis/Armour: 2mm aluminium.
Weapon: Stainless steel wedge
Drive: 60watt 2205 Brushless motor powered gimble drives.
Controller: Plush10 BESC + Spektrum AR6110E
Batteries: 7.4v 240mAh Lithium Polymer Battery
Notes: Experimental… Failure?!
Team Name: Chemically enhanced robotics
Member(s): Ken, Alex
Location: Sydney
Background: We are UTS students/graduates with experience in numbers, computers and service engineering.
Bots:
Hugbot - Ant Weight. Armed with knife.
Scalpel - Beetle Weight. Armed with vertical spinner.
Team Name: T.H.U.D
Member(s): Nathan Stahle
Location: Canberra
Background: Fulltime Army Officer of ten year, have spent time commanding tanks as well as light armoured vehicles. Am currently studying a mechanical engineering degree at ADFA. Otherwise I'm fairly boring, (it comes with living in Canberra.
Bots: Un-named – Beetleweight. Spinner
Team Name: Violent Engineering
Member(s):
Ben Hayhow (jaemus) - Designer, Builder, Driver
Melissa Sharp - Builder, Driver
Location: NSW Central Coast
Background: Electrician?
Bots:
Imperator – Beetleweight. lifter mechanism - lifts front end on roller bearings via a 10kg HXT HX12K MG BB Digital servo, secondary weapon: wedge shape
Mini Carbine - Antweight. 45g steel drum with 10mm dia csk screw teeth and internally mounted AX-1806C-2100kv brushless motor. Hacked servo drive motors.
Arisama – Antweight. Vertical spinner, 14T mountain bike sprocket with 2 teeth (others ground off), powered by a 2840 - 2400kv brushless motor
Team Name: Demon Robotics
Member(s): Glen Rose
Location: Shalvey, NSW
Background: Designer, Builder, Driver, everything-er, Bludger.
Bots:
Killer – beetleweight. primary weapon: 400 gram Single tooth disk - 7000rpm
The Exorcist - Antweight. primary weapon: ~10,000rpm 30 gram 130mm titanium undercutting bar
Team Name: Twisted Constructions
Member(s): Steven Martin
Location: Brisbane QLD
Background: Roboticist, Designer, Builder, Driver....
Bots:
Name: Scorpy
Class : Ant Weight
Chassis/Armour: 2mm Aluminum
Weapon : Servo Powered Clamping Claw
Drive : 2x 50:1 LP BotBits Gearmotors
Controller : 2.4ghz HK-T6A, 2x BotBitz Escheap10
Batteries : 2 Cell 130mah Lipoly
Description: A strong a belligerent robot which aims to grab and control the opponent. Scorpy is a veteran of many events thrown together mostly for a bit of fun but has recently been upgraded with a thicker outer shell and more robust claw.
Name: Kitbot
Class : Antweight 150g
Chassis/Armour: 1mm Aluminium
Weapon : Flipper
Drive : 2x hacked micro servos
Controller : 2.4ghz hobbyking radio
Batteries : 4 x AAAs
Name: Fury Jr
Class : Antweight 150g
Chassis/Armour: 3D Printed Shell
Weapon : Spinner
Drive : 2x hacked micro servos
Controller : 2.4ghz hobbyking radio
Batteries : 4 x AAAs
Name: BWW
Class : BeetleWeight
Chassis/Armour: PCB / Ali
Weapon : Melty
Drive : 1000 RPM
Controller : 2.4ghz hobbyking radio
Batteries : 4S Lipoly
Team Name: Barton Robotics
Member(s): Dylon Barton
Location: Newcastle
Background: Labourer
Bots: kablooey – Antweight. Vertical Disk.
Nul Void - Beetleweight. Undercutting Bar.
Updating in progress... _________________ ( •_•)
( •_•)>⌐■-■
(⌐■_■)
YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH
|