Joined: 09 Nov 2006
Posts: 631
Location: Newcastle, NSW
well atleast someone got pics of the damage courtesy of snack masheen,
we were gonna wait till we got home to fix it but andrew wanted to go into the rumble so we got a hammer and pliars and it nearly looked new when we finished _________________ Barton Robotics Youtube Channel:
https://www.youtube.com/user/dyl30
Joined: 09 Nov 2006
Posts: 631
Location: Newcastle, NSW
Well cyborg is all finished its new shell is nice and solid and the new drive motors work fine im yet to test it seeing how i just moved. Will try to get some pics but not sure seeing how i dont have the net on my computer, im using the net on my phone its better then dial up _________________ Barton Robotics Youtube Channel:
https://www.youtube.com/user/dyl30
Joined: 09 Nov 2006
Posts: 631
Location: Newcastle, NSW
Took cyborg out for a test run goes alright it sometimes when i go straight and then stop one motor keeps going for about a second dunno y but shouldnt matter that much gonna weld a piece of metal across the middle of the base and bolt that part to the base aswell as the sides, i doubt the shell will bend but without some bracing in weak spots the base most likely will, i still gotta re wire so i can use 2 stick packs for each motor seeing how they r bigger then before but other then that its all good and will be ready for round 3 _________________ Barton Robotics Youtube Channel:
https://www.youtube.com/user/dyl30
Joined: 09 Nov 2006
Posts: 631
Location: Newcastle, NSW
ok time to get some pics happening of the new version of cyborg seeing how i now have the internet again the pics arnt very good cause i dont have a digital camera at the moment so i gotta use my phone.
shell:
instead of the very thin stainless it has now got a 4mm thick steel shell
base:
have upgraded from 7.2v drive motors to 14.4v and i am running them @ 14.4v(dont know y the pic is pink my phone aint to good for taking pics)
inside the shell:
welded tabs around the sides making alot easier then last time to put on and take off.
whats left to do:
i gotta weld another piece of metal across the middle of the shell to help stop the base from bending and find a way of keeping the wheels on but other then that it is all ready for the next event _________________ Barton Robotics Youtube Channel:
https://www.youtube.com/user/dyl30
Joined: 09 Nov 2006
Posts: 631
Location: Newcastle, NSW
took cyborg out for its last test run before saturday, and i got my 4 year old bro to get a vid of it only goes for like 16 secs and quality is shithouse, had to use my phone (still looking for a digital camera)
http://www.youtube.com/v/Z8gpesvy3k0 _________________ Barton Robotics Youtube Channel:
https://www.youtube.com/user/dyl30
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum