I prefer [b]Saturdays[/b], Sundays are for slacking off
61%
[ 8 ]
I prefer [b]Sundays[/b], it's an extra day of preparation
38%
[ 5 ]
Total Votes : 13
Author
Thread
Bort Experienced Roboteer
Joined: 15 Jun 2004
Posts: 696
Location: Sydney, NSW
Anyone up for a planning meeting for the season and the annihilator this coming saturday? Good chance to debrief after robowars, exchange certain robots that certain people drove back up for them. Good chance to bounce some ideas around between us.
I know its short notice, but anyone interested?
Sun Jan 21, 2007 9:19 am
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
I wouldn't be able to make it this weekend. The weekend after would suit me, but again people might not be able to make it to that! _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
I can make it, but not until around 11:30. It's a good opportunity to drop by P nP for some parts. _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sun Jan 21, 2007 9:42 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
indeed. finally have some transportation by then so itll be a good opportunity to get a few items back
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
quote:
need to hunt for a better motor for visceral.
Series wound - let's look at some blower motors from older cars. I wonder if there is any way to tell if a motor is series wound before we take it out? _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sun Jan 21, 2007 10:34 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
i had the old series wound motor before i sold it off, it had less power at low volts but 24v im not too sure..
maybe alot of the motors have the series windings bolted to the case like starter motors. you can usually see the bolts in the cases. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
il show up, have never been to PnP, shud b kool _________________ Oh god, that old signature was terrible...
Sun Jan 21, 2007 11:22 am
Bort Experienced Roboteer
Joined: 15 Jun 2004
Posts: 696
Location: Sydney, NSW
Yeah PnP sounds alright to me. Would be good to get a few more people too.
Grassy, FYI its a $2 entry for PnP.
Sun Jan 21, 2007 1:23 pm
Valen Experienced Roboteer
Joined: 07 Jul 2004
Posts: 4436
Location: Sydney
@nick
you might be able to see if the case is magnetised?
series wound shouldn't be or only minimal. cases on most PM motors seem to leak a fair amount of magnetism.
i might be able to make it the coming weekend.
sunday is probably best for me but i'll leave by 1. _________________ Mechanical engineers build weapons, civil engineers build targets
Sun Jan 21, 2007 3:51 pm
Totaly_Recycled Experienced Roboteer
Joined: 15 Jun 2004
Posts: 1346
Usualy a series would motor wil give no coging type resistance whe you turn it slow by hand most magnet types will some more than others depenging on magnet strenght and air gap .
Sun Jan 21, 2007 7:37 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
That would probably be a good trick. Methinks you'd still have to tear the motor off first to test if it cogs or not though!
When Glen and I went to PnP not to long ago he was searching for a motor and we found one, but had a huge problem finding its actual terminals... and that was all we got. _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
I guess we can take a battery pack and see which motors spin the same way when their polarity is reversed. It would be easier to do that with the motor in place than to turn it to test the cogging. _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sun Jan 21, 2007 8:55 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
were people set on having this on saterday? I may make it on sunday, but don't change it if others can only make it sat. _________________ ( •_•)
Me and Glen were thinking of something fun to do on sunday apart from the PnP raid. A while ago when glen hacked up a boat I went to a cheapo store and bought a freezer tray, and used that as a hull We propose that on sunday we have a ghetto robot boat race where the rules are you have to use a piece of kitchenware for the hull. Might have it as our gift to you eh welch Come on, you all would have the random left over parts to throw something together in a couple of hours.
I'll even offer a 60A brushless ESC to the winner... only if enough people do it though! Would be hillarious...
Also... I hate to do this *again* but due to office moving (which is why i'm busy saterday) my dad doesn't have the time to drive me to black town for the day, so if Nick you wouldn't mind again? It hasn't rained for a while... might even want to visit that dumpster...
Joined: 15 Jan 2007
Posts: 7
Location: Alexandria, NSW
Is P n P happening on Sunday? If it is, what time? I'd be interested in tagging along for research purposes. Same re dumpster diving.
Great two days at Robowars 4. Speaking purely as part of the audience, the battles were awesome. My partner Sue loved it - and i wouldn't have picked bots as her speed at all.
Congratulations to all on a great show.
Rieflin*
(*the turkey formerly known as Supagenius, until somehow I stuffed up my account.)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum