Programming the Hobbyking Radio
Parts
Software
- Go to Product Page∞ and go to Files tab under the product description.
- Download the Software and Settings file.
- Extract the driver files and install the T6config.
- Plug in cable and browse to where you extracted the drivers and install
Programming
- Open T6A config
- Select correct com port
- Plug in cable to radio & turn on. You should be able to move bars with sticks
- The following screens show the programming settings for a radio with mixing and trigger switch
∞
∞
∞
∞
∞
There are no comments on this page. [Add comment]