Joined: 17 Jun 2004
Posts: 583
Location: Marayong NSW
Chris, any chance of 16.2m ( 3x5.4) x 380mm mdf to cover the side walls?
We were talking about putting sacrificial timber over the steel walls to protect them.
yeha untill some one like jeff f comes along with a bot with pushier lighter more drives and takes out the whole lot because it wants to put its head on the soft timber pillows instead of watching out cause diving off the roof onto tiles hurts (very bad analagy but meh buy a deck of cards and deal with it ) _________________ as a shadow is seen and not heard i am here
-Waddy the phoenix
Wed Feb 16, 2005 9:42 pm
Giant Robo Experienced Roboteer
Joined: 17 Jun 2004
Posts: 583
Location: Marayong NSW
Chris,
the 8 @ 2.4 x 300 would be great. the hight is not critical, as long as we can cover 3 walls at 5.4m each.
Thanks!
Thu Feb 17, 2005 1:16 am
chrisjon65 Experienced Roboteer
Joined: 15 Jun 2004
Posts: 754
Location: blaxland
no probs ,it is ready for pickup when you want ...saturday is good for me ,but im there sunday all day as well i have a huge job going on at the moment so im there all the time .....if someone wants to do a quick 30min runner to emu plains to pick it up on sat well ill be there _________________ Photos - http://community.webshots.com/album/154092733uokpXC
Photos- http://community.webshots.com/album/166819552PDWWqP
Thu Feb 17, 2005 6:14 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
hmm that new wall is looking sweet. the front box section part alone looks like its pushed the arena over the 2.5 ton mark _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Sat Feb 19, 2005 7:14 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Is there still a push out zone?
(bet you've never seen that guy before!) _________________ ( •_•)
angus yeah we have its in view more emoticons i am yet to see a website thats been coded using php with out him _________________ as a shadow is seen and not heard i am here
-Waddy the phoenix
Sun Feb 20, 2005 8:23 pm
Giant Robo Experienced Roboteer
Joined: 17 Jun 2004
Posts: 583
Location: Marayong NSW
Sorry, no push out zone, but if your`e aponent agrees, we could take out the centre tile and give you a pit to work with.
The front wall is up and all the panels back in place.
Just a couple of small jobs left I will do during the week.
Chris, if possible, could you bring along the timber on Sat. morning and it should only take a couple of minutes to install.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum