excellent. got the steel base plate mounted in now, sits flush with the base and weighs the same as the old one in addition to provide much more strength.

shaft is also cut out and have a nice new 25mm one sitting in there cant believe 1 meter of shaft cost $13... i heart edcon steel!

so now all that remains is to try and put all the guts back in. will put up some pics later
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

That's a good price for 25mm shaft - was it hardened and/or polished? If you want, I can bore out the bar and pulley to make a good fit on the bigger bearing.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

not too sure what type it is, dont think its hardened though. looked alot like stainless steel sparks though when i was cutting it which is interesting.

might take you up on that offer just organising a bissaloy bar for it now
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

wrt the first wep test.

_________________
Mechanical engineers build weapons, civil engineers build targets

;.; !!

anyway to reduce epic failure heres the new shaft and semi welded in base plate. had to cut the other side off as it bent heaps when i was tacking it on and shattered the other welds off. yargh, will fix that tommorow.


_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

xD <3 the port holes.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

haha yes they are most excellent. but you phail at drawing skills. to make this post worthwhile i should note that i will try and wedge 2x 300w motors into it
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

it can be done easy
_________________
A journey of a million miles begins with a single step followed by a hell of a lot of other steps so get walking

yes it can be so we unveil phailbot v2! haha

i will cut the bottom out of the side box section, build the drive train within that and then weld the bottom back on in 3mm steel. so we should have 4wd all in the same space as before. excellent.


_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

so phailbot a spinner or wedge??
_________________
A journey of a million miles begins with a single step followed by a hell of a lot of other steps so get walking

why would a wedge have 2x 300w motors poking up like that XD
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

for mexican sombraro twirling ^.- phailboat is definately wedge bot minus the wedge and add the spinner
_________________
as a shadow is seen and not heard i am here
-Waddy the phoenix

Kablamo!!!!

whooo damn. and plenty more to come

should have the bisalloy bars back next week. they are 20mm wider and 2mm thicker beefing the weapon weight up to 12kg from 7.5kg.

also having an adapter lathed up for a 25mm bearing to go on top of the bar, then ill weld it on and will recess the bottom bearing straight into the pulley. which should make a nice strong setup.

aside from that am ditching the 300w scooter setups in favour of ev esque fan motors. the performance was impressive and they are much smaller than the 300 motors + easier to mount so will go on the great pick and payless venture to find some more

when thats all done i will put the time into getting the drivetrain setup. should be plenty o fun
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

well have some progress on this robot anyway. i wont be using the timing pulleys on this version but instead v belt to limit the shock

and $120 later and my new weapon motor has finally shown up. woohoo! all 9hp of it will start making some mounts up for that this week. should be a tight fit but will make it fit in any case
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz