|
|
|
ffej
Experienced Roboteer
Joined: 22 Jun 2004
Posts: 595
Location: Kurrajong, NSW
|
I did post some pics up a while back, but I think that may have been on the abbl forum, which is now dead.
If im still awake when I get home tommrow at about 7pm-ish (I wont be sleeping till then, thanks to tonights LAN party and work the next day . . . ) ill see if I can find the remains of one and take some pics for you.
They are pretty easy to identifiy after you remove the top though, they look like the thin gap motors with no iron core, have a big, very strong, magnet on the bottom, theres a nice big ali shaft coming from the armature that turns into a plate with 3 M5 screw holes at the top, and all of the brushes are under the armature. Also, when all of their mountings are removed so you just have the bare motor, they wont sit flat because of the brush mountings and the bearing housing on the bottom. _________________ Jeff Ferrara
fb@ffej.net
ffej.net
|
Wed Jan 12, 2005 2:12 pm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|