XD *nick gives you a dx6 case with futaba attack 2er internals*

damn brace the hell out of those side wedge things, there gunna get shredded off at the welds.
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

If those welds shear off, I'll buy you a 12 pack of coke... or a free punch to teh fayce
_________________
https://www.halfdonethings.com/

because im such a generous guy ill give that offer to jeff XD did you fully weld them or something? my computer is too lame to load all the pics so ive only seen the tacked on ones XD
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

_________________
https://www.halfdonethings.com/

Go you halves in the case of Coke, Glen but not the punch. I figure that hitting the ends of the pipe will have a large leverage effect on the welding and something will bend, even if it doesn't break. I still plan to go for the wheels of course, or the back. Perhaps the other thing that would work witht those huge wheels is to drive Jolt backwards and wait until Arron charges the big rear wedge; those wheels could probably drive right up the wedge and into the blade
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Jolt has got to be able to drive first Can you drive that spinning thing in a straight line, or are you still practising on attacking the walls
_________________
https://www.halfdonethings.com/

Aaron quiet up bitch, until u actually get something made dont u start the trashtalking.

Borrowing Andrews fine work u lil bot bitch
_________________
Andrew Welch, Team Unconventional Robotics

I knew I would get the trash talking off to a good start ! Are T2M's 3mm sidewalls quivering with fear yet?
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

@Welcher: You forget how long ago T2M was built. Andrew and I bothed worked on it, and I thank Andrew dearly for the help and lessons he taught me when we worked on it. Sure, I haven't built my bots all by myself, but I don't claim to either. Now go smoke some EV's Welcher.

@Nick: T2M has no fear of Jolt. I don't see a need to fear it. 3mm aluminium armour isn't much, but it's enough to survive and beat Jolt. See you in the arena Nick, I'm waiting.
_________________
https://www.halfdonethings.com/

The current version of T2M is a purpose built Jolt killing machine, watch out

lol

Last edited by assassin on Sat Mar 25, 2006 10:28 pm; edited 1 time in total

If Jolt was a golf club, T2M would be the cane toad Oops, was that going a bit far?
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Lol. The front end was made for horizontal spinners, with the ultimate end use of beating Jolt. But T2M was actually build 3 years ago as a test bed for the big ass winch motors.

EDIT:

If Jolt was a golf club, it would be one of those, over priced clubs that works as good as a $5 club.... Opps... Did I go too far
_________________
https://www.halfdonethings.com/

you havent had the jolt experience

i'm bringing my earplugs.
_________________
Mechanical engineers build weapons, civil engineers build targets

lol and make sure you get a dustpan and broom so you can hand t2m back to aaron well all the parts that are even remotly reconisable as t2m and not dustparticals
_________________
as a shadow is seen and not heard i am here
-Waddy the phoenix

The arena will show all...
_________________
https://www.halfdonethings.com/