Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
go back to hobbyco and pick up a v-tail mixer you plug that in between the servos and the radio and it allows you to control it via one stick. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Help! I got the micro-switches, but I am having trouble mounting them with the servo. I bought some cheap composite wood from spotlight to mount them on. A diagram or photo would be tops. _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
ah now your getting into the thick of it, thats my most hated of jobs. ill get a picture of screwys old controllers but heres a quick run down.
imagine if you will a square of wood in your case.
then you cut out a slot for the servo to fit through in the middle of the square, and then mount the two microswitches either side of it with the two bolt holes. then the servo horn (the circle or t shaped thing on top of the servo) should touch each switch when the servo rotates.
Yeah, I THINK I got that sorted, but I need to raise the micro switches, otherwise the horn doesn't contact. (MORE fiddling)! The pic will be great! _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
simple way to do that is to put extra nuts UNDER the microswitches and above the mounting plate. that way you can raise them up. i had to do that on screwy.
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
if your talking about the servo cut out things there sure is
basically drill 4 holes at the corner of the shape that you need to cut out (the shape of the servo) then you can just put a jigsaw blade in the hole and cut the shape out, easy _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum