Joined: 11 Nov 2015
Posts: 9
Location: Brisbane, QLD
First Combat Robot (Antweight) Help
Hey guys!
As you may have guessed from the title of this thread, this is my first bot and because of that, I have a few questions (which probably sound stupid). Here they are:
1. Do my parts "work" together?
2. Is there an issue in the diagram below? (excuse my masterful artistry)
3. Do you recommend any wheels for the bot?
4. Does the name Overflow inspire fear into your hearts?
The power switch and transmitter are available from BotBitz also. You will find postage from overseas can be quite high on heavier items like the Tx.
I put a 3s lipol in my transmitters.
You will need some M1.6 screws. _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Sat Apr 01, 2017 2:04 pm
chunkulator
Joined: 27 Jul 2016
Posts: 219
Instead of cutting off the power supply wire on the second ESC's servo connector, you can pull the contact out of the header (lift the plastic latch with a jeweller's screwdriver) and then tape it around the lead with some electrical tape. This way you can put it back in if you want that ESC to supply power in the future.
Sun Apr 02, 2017 4:17 pm
GumdropGary364
Joined: 11 Nov 2015
Posts: 9
Location: Brisbane, QLD
Awesome! Thanks for the help, guys.
Sun Apr 02, 2017 7:14 pm
Forum Jump:
Page 1 of 1
Forum Rules:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum