Joined: 07 May 2015
Posts: 115
Location: South Australia
new builder
hi all,
I'm James from SA, been looking in to roboWars for a while now and finally decided to give it a go. Just looking for some advice from the community and information on any events that are around.
For experience i'm an electrician by trade. I have been racing rc short course tucks for many years.
Really these days we only have a few big events a year. I am doing something at Vivid Sydney in 3 weeks. Or there is the Nationals in Brisbane in October. Doing stuff local is great but its hard to get the numbers and motivation without a big crowd.
Are you keen to travel? They are usually pretty interesting weekends.
Joined: 08 Nov 2006
Posts: 1265
Location: Adelaide
A South Australian, welcome. I am a South Australian (Adelaide) but only until the day before Vivid (late May 15) unfortunately.
While my current robot is quite terrible as it was built very quickly and and now butchered to have a new weapon, I may have some free time next weekend around preparing to move.
If you have done RC trucks you will be familiar with all the basics to get a robot moving like RX, motors, batteries (generally lithium now) and ESC (although hobby brushed ESC are not generally up to the task although people are having luck with brushless for drives).
Key differences are ensure it can instantly reverse, has a weapon of some sort (even if it is a wedge or axe bolted to the front of the robot for non sportsmen) and has suitable armor (sportsmen need less).
Last year at the nationals we had a chipboard armored wedge and a robot made out of plastic cutting boards so it can be very easy to get started without needing full metal machining workshops.
-Sean. _________________ Remember to trust me, I am an Engineer.
Joined: 07 May 2015
Posts: 115
Location: South Australia
Cheers for the information. whichs is the most popular? And which would you guys recommend?
Fri May 08, 2015 4:47 pm
seanet1310
Joined: 08 Nov 2006
Posts: 1265
Location: Adelaide
You can be more creative with the sportsmen class as you don't need huge amounts of Armour.
All sportsmen can generally entire the normal featherweight comps if they are tough enough but the super simple wedge robot can't enter a sportsmen. Kojack is a good example of a sportsmen that has completed very successfully in the nationals.
The nationals have always been normal fetherweighs. It is only every couple of years a very large, interstate sportsmen featherweight event is held. If you are willing to travel to QLD for their smaller events then sportsmen is more suitable as they can have non spinner events.
The other divisions in Australia are Beetles (popular in NSW that have an arena set up in a builders back yard) and Ants in QLD.
Ants often make an appearance at the nationals however last year it was a tad lackluster so I am unsure if this will continue. _________________ Remember to trust me, I am an Engineer.
Joined: 07 May 2015
Posts: 115
Location: South Australia
cheers, so the sportsmen class is the same as featherweight bar the shape restrictions and weapons? 13.6kg?
I probably only going to make one event a year due to the traveling. (more if i get addicted).
Sat May 09, 2015 7:43 pm
seanet1310
Joined: 08 Nov 2006
Posts: 1265
Location: Adelaide
Yea, both 13.6kg
Basics of sportsmen fetherweights is. Needs an active weapon, no wedges, severe limits on spinning weapons.
Basics of Normal Fetherweights is. Can have wedge, typically does not need an active weapon, no limits on spinning weapons.
Both ban some weapons like EMPs and depending on the venue it is safer to assume that flamethrowers are banned these days at most if not all locations. _________________ Remember to trust me, I am an Engineer.
Joined: 07 May 2015
Posts: 115
Location: South Australia
Cheers for the help. im guessing spinning weapons are like a rotating mass or saw blade. But a swing arm like weapon is ok.
Sun May 10, 2015 4:49 pm
Nick Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
I think saws are still OK in sportsman bots, reason being their low weight. There is a pretty cool sportsman in the US that packs a chainsaw as one of its weapons! _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sun May 10, 2015 5:18 pm
seanet1310
Joined: 08 Nov 2006
Posts: 1265
Location: Adelaide
From the email regarding the upcoming sportsman. If you planned to go saw on a sportsman be proactive I would recommend. Stevo entered an actuated saw bot last public sportsman
The No Wedge rule states that all surfaces within 1 inch of the ground must be perpendicular to the floor. Weapon designs must be consider this rule and while a sloped surface may be allowed this must be kept within reason. This rule is does not explicitly state what is and is what not allowed but as a rule of thumb anything greater than 1/4 of the robot width would not be considered eligible. If you have any doubts please contact me about your robot. As always this does not apply to weapon spatulas
The Spinning Weapons are not allowed to spin above 400rpm however does allow weapons with low inertia. Based on this unmodified saw blades may be allowed but any weapon exceeding the 400rpm or with high mass should contact me prior to competing. _________________ Remember to trust me, I am an Engineer.
Joined: 07 May 2015
Posts: 115
Location: South Australia
Been doing a lot of sketches and some plans. Got all of my motion and power systems sorted. Been playing with the idea of a swing arm with a spike. In a bot with a triangle kind of frame and a dome cover. With mechanics not being my strong point. I think im just going to have to experiment. Thinking along the line of a linea servo for the swing action.
Sun May 10, 2015 7:54 pm
Nick Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
If you were thinking about an axe weapon, linear actuators are usually much to slow. They are good for weapons that crush or grip, but not for something that moves fast enough for an impact. Other builders have use scooter motors and belt or chain reduction to swing an axe weapon. _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Sun May 10, 2015 8:08 pm
James2
Joined: 07 May 2015
Posts: 115
Location: South Australia
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum