dyrodium
Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
|
Team Dyrodium Evolution Sale!
Look at all this SHIT XD
Totally Clearing EVERYTHING possible, to make room for a different direction in my robotics hobbies... can't afford the time effort and money to make countless robots, will now be only a few that I keep repairing and upgrading... all the superfluous parts have to go. No prices, just PM me an offer for whatever catches your fancy.
Wedge bot of wedgyness, semi made it for the event that got moved, and being in Perth couldn't attend... 6mm bisalloy 400 wedge with 6mm stainless sides, 1.6mm stainless base plate and 6mm mild rear plate. I have a 2200mah 5 cell 40C lipo and sabretooth 25A esc that would suite this chassis (but won't sell separate just want to give new guys a chance to get a head start). Has 18V DSE drives and banebots wheels.
PENDING
http://img.photobucket.com/albums/v424/dyrodium/P1010695.jpg
http://img.photobucket.com/albums/v424/dyrodium/P1010697.jpg
http://img.photobucket.com/albums/v424/dyrodium/P1010698.jpg
Huge overkill deathspinner frame I STILL HAVE IT this thing cost me over $180 to cut... All 6mm bis 400, make an offer!!! Would be epic with one of the newer reliable brushless motors out these days...
http://img.photobucket.com/albums/v424/dyrodium/P1010699.jpg
Raptures infamous weapon disk, still has heaps of life in it! Made from 12mm bisalloy 400. Bushing is a bit worn but still works well, replacement is $10 from CBC bearings. Also have a 20mm 4140 shaft which would suite perfectly. Can cut to length...
http://img.photobucket.com/albums/v424/dyrodium/P1010700.jpg
http://img.photobucket.com/albums/v424/dyrodium/P1010703.jpg
Also semi finished frame for a simple beartrax style horizontal spinner available using ½” 4140 and mild angle.
http://img.photobucket.com/albums/v424/dyrodium/P1010707.jpg
Well loved 6.5mm or so titanium grade 5 plate, has deep scratches and a few gouges but the plate is still perfect for indestructable armour. The aluminium piano hinge could use replacement but the plate has tapped screws which makes this easy... (yes tapped into the titanium!)
http://img.photobucket.com/albums/v424/dyrodium/P1010706.jpg
Parts for a seriously heavy duty drum weapon, carbon steel pressure pipe not crappy welded mild...
http://img.photobucket.com/albums/v424/dyrodium/P1010705.jpg
EV, fan, 100W scooter (2 of) and reciprocating gearbox wiper motor...
http://img.photobucket.com/albums/v424/dyrodium/P1010708.jpg
http://img.photobucket.com/albums/v424/dyrodium/P1010713.jpg
2 x Modified PSU's for running chargers, unneeded I have a bigger one that runs the lot now...
http://img.photobucket.com/albums/v424/dyrodium/P1010712.jpg
2 x 6 cell A123 packs made for my robowars robot which decided to suck horrifically, not used since... one pack has new green A123s other has ones removed from a new dewalt battery pack. No balance leads, I charge at 0.5ma to balance the cells and have never had any issues...
2 x 2 cell A123 packs with balance leads.
PENDING
Massive amount of carbon fibre tubes and thin dia rod for making large light antweight frames
PENDING
Also damaged scorpion HX ESC, one side does not respond but slowly trundles foward... can be fixed but never bothered to send it back.
http://img.photobucket.com/albums/v424/dyrodium/P1010709.jpg
Also wanting to find a new home for my soldering iron... well loved very powerful unit from jaycar, very easy to read screen with real time temp monitoring and a 60W into 24v heating element. Too big to be portable so I need a smaller less fancy one...
PENDING
http://img.photobucket.com/albums/v424/dyrodium/P1010714.jpg
http://img.photobucket.com/albums/v424/dyrodium/P1010715.jpg
Lastly selling the very desk I work on... Would need to be picked up... I doubt anyone is interested but I figure i'd put it here anyway!
http://img.photobucket.com/albums/v424/dyrodium/P1010711.jpg
Very happy to do machining work or similar if it makes any of the listed parts more useful, depending how costly/ time consuming they are + materials.
PM any offers or questions, cheeers guys :O You're not losing a robot builder, i'm just... changing my direction... _________________ ( •_•)
( •_•)>⌐■-■
(⌐■_■)
YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH
Last edited by dyrodium on Thu Jul 22, 2010 7:43 pm; edited 2 times in total
|