andrew
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
|
HA HA HA HA HA HA HA
Man cheers so much for your help Nick, got a badass motor mount custom made by Nick, the piece turned out amazing, way too nice to put into orbit really
got weopon setup welded and almost got the bearing block mounts finished or somewhat sorted to where i can either bolt it to the base or sidewalls or both
currently am slowly drilling out the mounting holes as the american thread pisses me off and the bolts r absolute shiz so i drilled and re-tapped it for M5 bolts and although it feels a lil loose when threading it in once u bolt it to the baseplate etc its very firm and with loctite itll be fine
slowly am bolting frame pieces together more (not relying on bolting everything purely to baseplate, am bolting frame pieces to each other for added strength).
slowly getting there, i really want to have upgrades done before new years so plenty of testing can be done
also purchased a nice item from Nick which will assist me that as long as i mount it right not even cobra will avoid the disc and shall recieve some flying lessons
Also hopeing before robowars to have a fleaweight robot made, got the parts just need to do it, will either be a FBS/overhead spinner of some form or a vert spinner _________________ Andrew Welch, Team Unconventional Robotics
|