Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
well how say we judge it up to 5 minutes, then we just keep going (the rest would have no bearing on judging) _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Fri Sep 17, 2004 6:16 pm
Nick Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
That could work - I don't think many bots have much more than 5 minutes capacity anyway.
Do we have a list of confirmed bots yet? Basilisk will be there with some new bits but maybe only one battery pack. The Robolympic testbot may make an appearance as well. _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Fri Sep 17, 2004 6:29 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
well cobra will be there once more, radio or not.
its looking fine at the moment, ill have to get round to doing those angle brackets on the outside but the mangled corners are really making it tricky. the new secret hammer head (basically a little wedge with spikes out the side ) should utterly kill the rest of you guys as well, so just expect to loose against me (i seriously expect on getting my ass kicked big time too just so you know..) _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Fri Sep 17, 2004 6:33 pm
Nick Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
He he, I am hoping my mods will work against all those pesky low-hight bots and Robort too! If I can't beat Robort this time, I will seriously have to think about taking up something quieter like lawn bowls _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Fri Sep 17, 2004 6:39 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
we probbly wont be able to make it
too much glassing and electronicising to do... blame nick _________________ Mechanical engineers build weapons, civil engineers build targets
Fri Sep 17, 2004 8:29 pm
ffej Experienced Roboteer
Joined: 22 Jun 2004
Posts: 595
Location: Kurrajong, NSW
Dont think ill be able to get to the build meet, but Singularity should be at Marayong 8 with mods to make it nice and strong, provdiing that the RS80D is all good with this replacement regulator and at least one of my battlepacks is functioning properly. Are we going to adopt the weight jump to 13.6kg this event?
BTW, Singularity will run for more than 10 minutes on a fresh charge, providing of course that the stupid powerpoles dont come undone. Im changing them all to deans connectors, they take a hell of a lot to come undone, are much smaller, and still will carry 80A continuous. _________________ Jeff Ferrara
fb@ffej.net
ffej.net
Fri Sep 17, 2004 9:05 pm
Totaly_Recycled Experienced Roboteer
Joined: 15 Jun 2004
Posts: 1346
MM whats the weight jump Thing about ..
Have i mised something ?
Fri Sep 17, 2004 9:21 pm
Waddy the phoenix
Joined: 16 Jun 2004
Posts: 971
Location: sydney
hmmm bit late i knowbut tse will be there for round 8 and i will go to the build meet today... i know up real early but meh and thanks to nick if basilisk kits my anti el-b visor he might go flying... i hope _________________ as a shadow is seen and not heard i am here
-Waddy the phoenix
Sat Sep 18, 2004 2:14 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
well the builders day was pretty sweetness.
el bravos really got a kick in the ass. much faster now, but on a far more impressive and important note cobras new wedge/hammer goes straight under the front! yay for me
refbot got its drive fixed, and no work on the arena wall yet, we'll probably just dump a ton more screws in the thing in the morning of the event.
one little surprise too, we found a bar of sorry that got torn out and was sitting inside refbot (which was on the table ), looks like it had some basilisk and plan b bites in the thing too - nice!
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
Hello N.S.W people. Wish lots of talk about teh weight boosting and the poll showing that we will have the extra weights.
When are we planning on implementing it into our series/competition. I wish to know because i am about to build my next featherweight and need to know because i can change some thigs and add some stuff if need be etc etc. Thanks all. _________________ Andrew Welch, Team Unconventional Robotics
Sun Sep 19, 2004 4:10 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
well if we do im pretty sure itll be for next year, implementing it next event wouldnt be none to smart, i guess just build it to 12kg.. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Sun Sep 19, 2004 4:46 pm
Waddy the phoenix
Joined: 16 Jun 2004
Posts: 971
Location: sydney
ok well i dont care either way about the weight lift or what ever.
ok if we have time who is up for robot soccer this event? cause i glen and jeff seem up for it and i got a ball... (a mini basket ball with cable ties on it lol seems good tho and hopefully wont roll down on the slight angle that the arena has) and i can make up some goals today aswell so yeah _________________ as a shadow is seen and not heard i am here
-Waddy the phoenix
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
RoboWars Australia Forum Index
-> State Specific Information
) should utterly kill the rest of you guys as well, so just expect to loose against me 
(i seriously expect on getting my ass kicked big time too just so you know..)
)
yay for me 
