I have some small rectangular magnets, about 8 x 20 x 3. I can measure them when I get home if you are interested and there are at least ten.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Anyone looking at doing a pre-nats banebots order so we could perhaps split some costs?

Have been hanging out for a set of P60s but no chance I'm paying the beyond ripoff shipping for only a pair of them.

It's $55 for a pair of gearboxes + motors and $68 for 4x of each. So should be a fair sight cheaper

Cheers.
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Sounds plausible - I will need some extra BB parts before the Nats.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Any one by chance have a pair of reduction boxes to suit nema 17 size stepper motors? Around the 10:1 ratio.

Cool well if you wanna let me know what bits you need and i'll sort it out. Hoping to order it Friday if poss
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Does anyone know of an 8 relay control board that can be used along with an r/c receiver? Like the battle switches.

Ahoy, after some spares for demon.

Has anyone got 3 1/2" x 7/8 or 1 1/4 inch colsons or equivalent sized banebots? If so let me know. Keen to buy! Shipping from the US is so expensive
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

You mean like the pair that are waiting over here for you?


_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

i know , aren't they the 3" ones though? Turns out i need a little bigger for demon. They'll fit the flipper but. If they are then i think i need a sleep in lol!

This weekends free so i'll sling round tommorow for em if you're about.
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Actual size is 75 x 30.7mm - hit the sack now! I will be around all tomorrow, just SMS me when you are on the way. I have4 some more 3.5" wheels if you need them.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Looking for some p80 4:1 gearboxes and cim motors.

Banebots shipping cost is such a joke.

If i need to order them from banebots I may do a joint order if anyone is interested but i need to order soon as i have a deadline.

I don't think anyone ever used the 4:1 P80, its not much use in a featherweight.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

quote:

---

Originally posted by Nick:
I don't think anyone ever used the 4:1 P80, its not much use in a featherweight.

---

The problem is that they are large and heavy and its surprisingly hard to adapt motors to it - believe me, I have one. The P80 is a very well made and probably an excellent choice for a lightweight but for a featherweight, a DeWut kit beats it in every category.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

yeh size weight n power wize the dewalt is better but the p80 and cim is half the price and is prob more robust so for my work project it is more practical.
_________________
Tim Team Reaper.