www.robowars.org

RoboWars Australia Forum Index -> Builders Reports

Team M3N7@L B0T - QLD
Goto page 1, 2, 3 ... 14, 15, 16  Next

Post new topic   Reply to topic
  Author    Thread
Tim



Joined: 30 Oct 2013
Posts: 247
Location: QLD


 Reply with quote  
Team M3N7@L B0T - QLD

Hi Everyone new here, first post I have done a fair amount of reading and started the build on my bot after seeing and meeting a few of you guys and gals at the Nationals in Ipswich recently Great Show BTW got my interest anyway Wink

Here is what I have so far, I followed a link to the tutorials and this is what I have come up with, this will be a template for the latter metal bot.
the wheels will be enclosed from the sides. However the design brief is that it can run both right side up and upside down 4mm clear either side.


So far it's just a couple of Ozito 12v drill motors/boxes from Bunnings, Breadboard and red wheels as advised.

Planning on using a pair of tz85a's, and this list of items

http://www.hobbyking.com/hobbyking/store/__35473__Turnigy_nano_tech_2650mah_4S_35_70C_Lipo_Pack_AUS_Warehouse_.html [url]


http://www.hobbyking.com/hobbyking/store/__16255__Hobby_King_2_4Ghz_6Ch_Tx_Rx_V2_Mode_1_AUS_Warehouse_.html [url]

http://www.hobbyking.com/hobbyking/store/__15042__Turnigy_Accucel_6_50W_6A_Balancer_Charger_w_accessories_AUS_Warehouse_.html
[url]


http://www.hobbyking.com/hobbyking/store/__7308__Rhino_610mAh_3S_11_1v_20C_Lipoly_Pack.html [url]


Here are some pic's
http://s1348.photobucket.com/user/eclipse150/media/2013-11-11204452_zpse69e3ddb.jpg.html?sort=3&o=2 [url]

http://s1348.photobucket.com/user/eclipse150/media/2013-11-11204518_zpse4d3736b.jpg.html?sort=3&o=3 [url]

http://s1348.photobucket.com/user/eclipse150/media/2013-11-11212121_zps213b3c39.jpg.html?sort=3&o=0 [url]

http://s1348.photobucket.com/user/eclipse150/media/2013-11-11204555_zpsc3a07fe1.jpg.html?sort=3&o=2 [url]

Just looking to build something simple to start with, I like the look of Roadkill ( the little orange bot if I'm correct ) so hoping to emulate that bot to some extent.

Not sure how to post images correctly so if there is a link to a "How to" please feel free to point me to it.

Thanks to Miles&Jules for their time and the Wheel mounts Cheers! Very Happy
It may be a slow build but I'll get there, may be asking a few questions yet before I order all the gear I need as I like to get it right the first time ( component wise that is ) as I'm not sure weather to go for the HK Transmitter listed above or the "Orange 6 channel" I've read about. Does the Rino 610mAh Lipo ( as above ) fit in the Orange 6 Channel?

Cheers Tim


Last edited by Tim on Thu May 29, 2014 2:05 am; edited 4 times in total

Post Mon Nov 11, 2013 11:40 pm 
 View user's profile Send private message
Philip
Experienced Roboteer


Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane


 Reply with quote  

Looks like a very good way to start, Tim.

Just click and paste the IMG link on the Photobucket page.
_________________
So even the rain that falls isn't actually going to fill our dams and our river systems

Post Tue Nov 12, 2013 2:37 am 
 View user's profile Send private message
Knightrous
Site Admin


Joined: 15 Jun 2004
Posts: 8511
Location: NSW


 Reply with quote  

Get the Orange RX T-SIX transmitter and a suitable Orange RX DSM2 receiver to suit Smile

It's much better then the cheap HK T6A and has a lot more features that will help you keep your sanity later on in robot life Wink
_________________
https://www.halfdonethings.com/

Post Tue Nov 12, 2013 8:08 am 
 View user's profile Send private message
Jaemus
Experienced Roboteer


Joined: 01 Apr 2009
Posts: 2674
Location: NSW


 Reply with quote  

Most sensible sounding newcomer ever Smile
_________________
<Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls

Post Tue Nov 12, 2013 9:14 pm 
 View user's profile Send private message Send e-mail MSN Messenger
Tim



Joined: 30 Oct 2013
Posts: 247
Location: QLD


 Reply with quote  

Thanks Phillip Wink Knightrous in regard to the Orange RX T-SIX transmitter [url] http://hobbyking.com/hobbyking/store/__28494__OrangeRx_T_SIX_2_4GHz_DSM2_6CH_Programmable_Transmitter_w_10_Model_Memory_Mode_2_.html do you know of a suitable Lipoly rechargeable Battery that would fit in the Transmitter I've checked out the Data sheet and the batt holder area looks as if it would only take a standard 4xAA Battery's = 60mm x 50mm x 15mm ( approx ) . The image is on pg. 5 [/url] http://www.hobbyking.com/hobbyking/store/uploads/23068243X7478X36.pdf There is also [url] http://hobbyking.com/hobbyking/store/__19481__Turnigy_4000mAh_Spektrum_DX8_Intelligent_Transmitter_Pack_.html however it's dimentions are both to long and wide So if anyone who uses the above mentioned Transmitter and knows of a suitable Lipo to use with it that would be great Very Happy [/url] Jaemus I'll take that as a complement
Cheers Guys Very Happy

edit:- I think I may have found a suitable battery pack for the Orange Tx [url] http://www.hobbyking.com/hobbyking/store/__7305__Rhino_610mAh_2S_7_4v_20C_Lipoly_Pack.html thoughts anyone? on suitability [/url]

Post Tue Nov 12, 2013 10:35 pm 
 View user's profile Send private message
Valen
Experienced Roboteer


Joined: 07 Jul 2004
Posts: 4436
Location: Sydney


 Reply with quote  

I got one of these
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=25439
its a *very* tight fit but it works.
I also suggest
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=44965
build quality isn't the best but it seems to do the job.

Also kudos for using whole words in a first forum post.
starting with the breadboard is a great way to get the hang of things.
_________________
Mechanical engineers build weapons, civil engineers build targets

Post Wed Nov 13, 2013 11:07 am 
 View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger ICQ Number
Tim



Joined: 30 Oct 2013
Posts: 247
Location: QLD


 Reply with quote  

Excellent Valen, that battery sounds like what I need, compared to the Rino 610mAh it is bigger Physically ( and capacity ) but will do the job Very Happy and the travel case wouldn't hurt for transport reasons good idea to protect an investment. Also scored another 7mm cutting board today ( metal chassis/body will be 6mm ) so my prototype should have a top/bottom, nice invertible bot. Will have to nail down a set order list from HK, however getting there, still a long way to go yet . Cheers Very Happy

Post Wed Nov 13, 2013 8:27 pm 
 View user's profile Send private message
Jaemus
Experienced Roboteer


Joined: 01 Apr 2009
Posts: 2674
Location: NSW


 Reply with quote  

I got a rhino 750 3S into my T6A but not sure about the Orange T-SIX
_________________
<Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls

Post Wed Nov 13, 2013 11:01 pm 
 View user's profile Send private message Send e-mail MSN Messenger
Tim



Joined: 30 Oct 2013
Posts: 247
Location: QLD


 Reply with quote  

Cool will keep that in mind HK just emailed me they claim that the ZIPPY Compact 850mAh 2S 25C Lipo Pack (AUS Warehouse) - PRODUCT ID: ZC.850.2S.25 will work I'm pretty sure that's the same one Valen mentioned


quote:
I got one of these
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=25439
its a *very* tight fit but it works.
But to charge it you also need [url] http://www.hobbyking.com/hobbyking/store/__18868__XT60_JST_Female_in_line_power_adapter.html according to HK. As far as Tx for the time being I feel that one's sorted, hopefully Very Happy

Post Wed Nov 13, 2013 11:43 pm 
 View user's profile Send private message
Valen
Experienced Roboteer


Joined: 07 Jul 2004
Posts: 4436
Location: Sydney


 Reply with quote  

check what comes with your charger, they generally come with a buttload of adaptors.

Also if you can get a charger with 240V input, it'll just make life easier.
_________________
Mechanical engineers build weapons, civil engineers build targets

Post Thu Nov 14, 2013 10:04 am 
 View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger ICQ Number
miles&Jules
Experienced Roboteer


Joined: 19 May 2010
Posts: 3973
Location: ipswich QLD


 Reply with quote  

Good work Tim…. can't wait to see how it goes together .. once all your bits arrive.
cheers
M&J Very Happy
_________________
Miles Blow - Julie Pitts
www.mulesfilm.com.au
www.wombokforest.com.au

-Pickasso- Vivid Sportsman champion 2015

Post Fri Nov 15, 2013 11:14 pm 
 View user's profile Send private message Send e-mail Visit poster's website
Tim



Joined: 30 Oct 2013
Posts: 247
Location: QLD


 Reply with quote  

Thanks for the encouragement everyone! Hey M&J Very Happy Well I wanted to see the Red wheels turn at least while I get my HK order sorted, so I hooked the drill motors up to a Arduino Uno & [url] http://www.ebay.com.au/itm/Dual-H-Bridge-DC-Stepper-Motor-Drive-Controller-Board-Module-Arduino-L298N-JT1-/400603102349?pt=AU_B_I_Electrical_Test_Equipment&hash=item5d45ce3c8d 3A max 2A continues current and 12V9.2AH/20HR SLA Battery, which usually runs these motors [/url] http://www.jaycar.com.au/productView.asp?ID=YG2738 on another bot I have ( the code used for the test = 3000ms FWD then 3000ms REV then 3000ms Left spin then 3000ms Right spin the code then repeats in a never ending loop. Using the Jaycar motors the Dual H-Bridge gets warm ( say after 10mins or so ) However when running the drill motors after just 1 & 1/2 - 2min max the Dual H-bridge was VERY VERY! hot. Not only that but the thing would barely pull the skin off custard hence the need for the Tz85a's ( and the large heat sink ) I assume, so using the Lipo battery sighted earlier in this thread being 12V2.65A what "generally" is the running current of the Tz85a's on a bot? and the drills? after a 3 minute round they must be quite hot?

Post Sat Nov 16, 2013 6:54 pm 
 View user's profile Send private message
miles&Jules
Experienced Roboteer


Joined: 19 May 2010
Posts: 3973
Location: ipswich QLD


 Reply with quote  

Yep a hardcore speed controller is the key….thats why botbits sell stacks of em….i don't know what drills draw in amps ,but it must be a lot for both drills to explode on 24v and the tz85 just keeps on going Very Happy …that said the tz's don't like jammed winch motors Sad
_________________
Miles Blow - Julie Pitts
www.mulesfilm.com.au
www.wombokforest.com.au

-Pickasso- Vivid Sportsman champion 2015

Post Sat Nov 16, 2013 7:58 pm 
 View user's profile Send private message Send e-mail Visit poster's website
Tim



Joined: 30 Oct 2013
Posts: 247
Location: QLD


 Reply with quote  

Got my HK order sorted for what I wanted some of it had to come from the International Warehouse so all of it did. Now to play the waiting game anyone know how long "in general" it takes for an order to come from HK's International Warehouse? approx 4kg if that makes any difference? mostly a few extra Lipo's and how does that affect the custom's situation? will it slow it down? Now to keep playing with FreeCad & 123D Design and order some more stuff Very Happy FWIW 2kg of that weight is the TX and it's case Very Happy With 2.5kg's of Motor's & Breadboard I'm starting to understand how quickly one could get to the 13.6kg mark.

Post Thu Nov 21, 2013 10:22 am 
 View user's profile Send private message
miles&Jules
Experienced Roboteer


Joined: 19 May 2010
Posts: 3973
Location: ipswich QLD


 Reply with quote  

Hi tim -its usually a couple of weeks maybe 3weeks with the batteries-cause they go through a different postal service-always exciting when it does arrive Very Happy
_________________
Miles Blow - Julie Pitts
www.mulesfilm.com.au
www.wombokforest.com.au

-Pickasso- Vivid Sportsman champion 2015

Post Thu Nov 21, 2013 1:32 pm 
 View user's profile Send private message Send e-mail Visit poster's website
  Display posts from previous:      

Forum Jump:
Jump to:  

Post new topic   Reply to topic
Page 1 of 16

Goto page 1, 2, 3 ... 14, 15, 16  Next

Forum Rules:
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

 

Last Thread | Next Thread  >
Powered by phpBB: © 2001 phpBB Group
millenniumFalcon Template By Vereor.