I've got a bunch of spare robot parts I'm not using in any time soon, so time to trade them into $$$.
BaneBots 4-7/8" blue wheels = SOLD
BaneBots 3-7/8" orange wheels = $8/pair (6 remaining)
BaneBots 1-7/8" green wheels = $5/pair
Colson 3" x 7/8" wheels = $10/pair
DX4e Transmitter + DSM2 RX = $25
300mm Bisalloy 400 "Demon" disc = SOLD
Victor 883 ESC = $70ea or $130/pair
Scorpion Commander 50V 90A BESC = $50
Pneumatic ram (40mm bore x 100mm stroke IIRC) = $10
300W scooter sprockets with chain = $10/pair
1000RPM eBay motors = $10/pair
100RPM eBay motors = $10/pair
T5 20mm wide timing pulleys = $20/lot
Turnigy C4260-550 brushless motor = $10 _________________ https://www.halfdonethings.com/
Last edited by Knightrous on Mon Nov 11, 2013 4:46 pm; edited 7 times in total
Thu Aug 22, 2013 3:51 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
Ill take the motor and controller as long as they're new. Is the ESC the full heatshrink one or the type with the 4 mounting flanges? _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Thu Aug 22, 2013 3:56 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
quote:Originally posted by Glen:
Ill take the motor and controller as long as they're new. Is the ESC the full heatshrink one or the type with the 4 mounting flanges?
Motor is new, only been used for a few test spins on an ESC to make sure it works and a dummy up for random ideas. ESC is the one with the 4 mounting flanges and gold heatsink. Has 4 caps on one ends that are heat shrinked together. _________________ https://www.halfdonethings.com/
Thu Aug 22, 2013 4:26 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
1000RPM motors are brand new from ebay, never used in a robot. Only tested them on a battery to make sure they weren't damaged when shipped. Have six of the 1000RPM versions and two of the 100RPM version (was going to do a lifter with them). _________________ https://www.halfdonethings.com/
Tue Nov 12, 2013 8:11 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum