Well guess I should start organising this again.

I am in with scorpy again. Pretty much in the same state.
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

I hope to have the new Stig running by then. Alex will be driving. If I have time and am able to get it under weight, I will bring the robot formerly known as Stig.
_________________
So even the rain that falls isn't actually going to fill our dams and our river systems

I'll be there with Fury Jr and Hellcat Jr

I'll be there with Kruger and Scarlet, maybe Brainless if I get time to mess with it.
_________________
https://www.halfdonethings.com/

Registration Page online!

http://qrsc.org.au/wikka.php?wakka=MiniMayhem2
_________________
https://www.halfdonethings.com/

The registration page say the 22nd. It should be Saturday the 25th.
_________________
So even the rain that falls isn't actually going to fill our dams and our river systems

quote:

---

Originally posted by Philip:
The registration page say the 22nd. It should be Saturday the 25th.

---

Hi guys. Just measured up my car. The largest arena I can fit fully assembled is ~ 800 x 800. Which is ~45% of the size of the last one. So I can either cut it down to that size which is pretty convenient for transportation or just leave it the same size and add a bit of a stand so I can mount a pit underneath it.

Plans for pit are to basically cut a hole in the floor and hang it underneath. Then lay a thin piece of MDF over it. Pit will be able to be removed by just pushing it out. Then we can lay a think piece of MDF without a hole for no pit.
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

I think 800 * 800 would be fine. Alex and I have fought on a table 870 wide with no problems.
_________________
So even the rain that falls isn't actually going to fill our dams and our river systems

what's wrong with the old arena?

I'm hoping to come. Won't have a bot though - just to watch and meet some of you and pick your brains

I am pretty pissed off at all the holes not lining up and it does need to be cut down somewhat. Might be easier to just leave it the same size.

Steve
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

The holes line up if you get a little girl to put it together.

Hi Guys could we make it Sunday 26th? I am heading to parklife on the 25th so won't be able to make it. If sunday is no good for you thats cool just run it without me.
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

I would still prefer Saturday
_________________
Get Some!!!

Secretary of the Queensland Robotics Sports Club inc.