bike is sold meet my new form of transportation XD!!


_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Great just great its bueatifull
_________________
A journey of a million miles begins with a single step followed by a hell of a lot of other steps so get walking

it is my friend.. i know. if you give me $20, ill even let you have your picture taken with it
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

hmmm i dont know its pretty shiney but i think the $20 is my freind more
_________________
A journey of a million miles begins with a single step followed by a hell of a lot of other steps so get walking

so apart from the different chassy and different coloured panels what is different?
_________________
as a shadow is seen and not heard i am here
-Waddy the phoenix

the chassis is heaps better on the new one, and it has a watercooled engine ( + radiator) and an extra 6kw

and btw what was the last name of that chick that was with you at manson? after recovering from a mad case of huge drunkeness i think i went to school with her! XD
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

big time doubt it considdering she came from kandos, name being sam
_________________
as a shadow is seen and not heard i am here
-Waddy the phoenix

Heres one for Glen
http://www.youtube.com/watch?v=q0eSGqn2Bl4
_________________
Great minds discuss ideas. Average minds discuss events. Small minds discuss people

hahah ive seen a video of one revving up. now i must have one!

ah well. in approximately 1 day and 8 hours i shall have won myself a tasty brushless etek and sevcon controller
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Impressive! Do you think it will go for much less than the $900 USD asking price at Team Delta?
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

well at the moment its

$250us for the motor alone
$400 for the controller
$105 aus for shipping.

so i hope it should be a fairly cheap conversion and lead to a full scale electric motorbike in the future. like me and jake where saying its expensive to begin with but i guess its the same as buying all your petrol before you buy the car
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Actually, its like getting your parents to buy all the petrol before you buy the car! Its a shame Dan isn't selling off the controllers on ebay too.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

need some money and can only race one bike at a time so my baby has to go -

The bike is a grc replica frame custom made out of 20mm thick aluminium. i had it specially made for the bike and it weighs 4kg less then the stock frame and it is about 40-50mm longer at the front so great for the bigger person. its also a dream to ride with the steering damper. turn in is great.

The motor is a ported out 40cc 5 port motor. crankcase has some mild porting but it needs to be ported out a bit more to match the cylinder (the cylinder porting is fairly extreme!). cracks very hard for a 40cc. its also unique in that the gearbox does not run in oil like the original which is a restrictive setup due to the 5 oil seals - runs dry so spins very free!

so yeah this bike cost $550 initially and i have dumped well over that into it again. unfortunately as things go you never get the money back so taking a big hit to sell it at $600 ONO.

Parts on the bike

- 40cc 5 port barrell
- Polini coil
- Polini blue reeds
- Polini water pump belt
- Blata coolant bottle
- polini pullstart
- polini clutch cover

Spare parts with the bike

- one COMPLETE frame (the original steel one)
- one complete motor with 19mm rep carb
- one performance pipe and stock pipe which have been modded a bit
- spare chain
- spare coil
- spare 3 port 40cc cylinder with head
- spare radiator







i will ship it at cost if need be cost is $80. thanks guys
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

I'm interested in the spare frame, got any pics?
_________________
https://www.halfdonethings.com/

Hey just wondering i found a oxy acetylene bottle set two bottle the oxygen bottle is about 3 feet tall and the acetylene bottle is about 2 and a half feet tall they both seem to work as had some gas left when i turned them on only a small puff then they were emty what would these be worth?
_________________
Tim Team Reaper.