ROFL I wish we took a photo of the ibc with the chip and jumper lying on the bottom of the box.
heh looks like the hit took a pretty big chunk out of the Ti too, did some damage to jolts teeth aparently! _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
Yeah, there is a chip off the top of one tooth and the same tooth has a bunch of silvery metal flakes pastered on, that have to be Ti
The event must have been a dream as I don't have the trophy to show for it. _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Mon Nov 06, 2006 8:41 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Hah more from that hit has just become aparent... The whole ibc box is fractured, the plastic is all cracked, and one section is only held on by a piece of remaining plastic about 1cm across! My ibc was RIGHT behind the titanium... like, resting on it...
Note to self and Nick, don't hit roadkill when it's inverted! ! _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
Point taken, let's not do that again! In the next bot, wrap some foam around the IBC case where it touches the frame. I use heavy closed-cell foam from an excersise mat and you are welcome to some if you want - it cost about $30 for 10 year's supply Glen has used the same stuff in the past. _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Mon Nov 06, 2006 8:55 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Hah I did have foam, just not high density stuff. Will definately take you up on that offer! _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
yeah its from those little camping mats you put under your sleeping bag. a 10m roll is about $20-30. takes ages to compress. awesome stuff. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum